DMX RDM Splitter 1×4 PCB

DMX RDM pass-through 1x4 splitter across 4 electronically isolated outputs for advanced communication. Achieve bidirectional feedback with the DSR4-PCB.

DMX RDM Splitter 1x4 PCB
DMX RDM Splitter 1x4 PCB
  • RDM Pass Through Capable
  • Four Electronically Isolated Outputs
  • Front Status LED Indicators
  • Electronic or TVS Chipset Upgrade
  • Compact Flexible DIY Integration
  • Reliable Field Serviceable Architecture
SKU: DSR4-PCB-2 Category: Tags: , , ,
Availability: 1-2 days

$159.00

159159
PCB Options
$20.00
$31.00
$19.00
$12.00
$7.00
PCB Assembly
*
$5.00
Comment
Addons Price: $0.00
Total Price: $159.00
Quick Specs
DMX Outputs4 Electronic or TVS
DATA TYPEDMX512 (250Khz)
RDMPass Through
POWER5V / 450mA

The DSR-PCB is a DMX 1 in 4 out splitter with RDM pass through. Front indicators show the unit power and data status including RDM. The DSR4 DMX Splitter (distributor, buffer, amplifier, booster) actively splits the DMX signal providing 4 separate DMX outputs. The outputs are electronically isolated from each other and each output can source up to 32 devices (DMX512 standard). For improved output isolation select the chipset upgrade for TVS “Transient Voltage Suppression” chips installed (recommended if the DMX wiring is near power lines and/or used outdoors).

FEATURES INCLUDE:

 

  • 1 In 4 Out Splitter w/ RDM Pass Through and Bypass Jumper
  • Engineered with quality parts and a reliable design
  • Power, DMX Data, and RDM (if selected) LED indicators
Weight 6 oz
Dimensions 6 × 4 × 3 in

IF RDM CIRCUIT IS SELECTED:

Software Revisions:

  • DSR V1.03 Reordered RDM turnaround sequence (beta release with limited field test data)
  • DSR V1.02

DSR RDM Splitter Operation Guide .pdf

DSR4-PCB Connection Diagram .pdf

  • Manufacturer: ELM Video Technology
  • MPN/Model: DSR4-PCB
  • Name: DMX 1×4 Splitter w RDM Pass Through
  • UL Listings: PCB pre populated
  • FUSE: 500mA SMT or optional 5×20 mm
  • POWER: Apx 450mA with 4 outputs sourcing 32 loads each
  • DATA TYPE: DMX512 (250Khz)
  • DATA INPUT: DMX512 – Pin 1 – (Shield) Not connected, Pin 2 Data – , Pin 3 Data +,
  • DATA OUTPUT: 4 separate DMX512 outputs – Pin 1 – Power supply common, Pin 2 Data -, Pin 3 Data +
  • RDM: Pass Through
  • Dimensions: 1.3″L x 3.4″W x H range from .6″ to 1″ with standoffs
  • Weight: 2 oz
  • Chipset Upgrade – The chipset upgrade has TVS IC’s installed on the outputs offering TVS (Transient Voltage Suppression) isolation on each output of the splitter. This is recommended if the PCB’s or wiring is installed in hazardous areas, near 120VAC or higher lines, or e.g. water fountain’s or shows.
  • IC Sockets – Easily replace chips by adding IC sockets
  • 5V Power Supply – wall style power supply compatible with the PCB
  • LED Mounting – Standard style is top surface mounted LED’s. Select BOTTOM MOUNT – if the PCB will be mounted on the backside of a faceplate with external LED visibility through a faceplate. Select – UNISTALLED if the LEDs will be extended to a panel, unused, or if unsure of the mounting style.
  • DIN Clips – for 35mm Rail – Clips are mounted on the PCB and will snap onto a 35mm rail
  • DIN Rail – 35mm x 8″

Related products

Shopping Cart