DMX to PWM Driver PCB

The DPM8-DRV is an 8-channel DMX-to-PWM constant-current LED driver PCB. Each output provides a nominal 1,400 mA during each PWM […]

$399.00

399399
Comment
Addons Price: $0.00
Total Price: $399.00

The DPM8-DRV is an 8-channel DMX-to-PWM constant-current LED driver PCB. Each output provides a nominal 1,400 mA during each PWM ON pulse. The installed NLDD-1400H drivers PWM frequency / duty factor are factory set at 900 Hz. Custom options, there are several constant current modules that can be used on this PCB, a socketed version of this board is available if customer preferences/mixes are needed, inquire for details. Dip switch start channel, and other functions available. Push pin connectors for quick installations.

LED string voltage is 6–46 VDC and is also limited to the LED-driver supply voltage minus 4 V. A 48 V supply supports an LED string up to 44 V.

NOTE: Two power sources are required: the supplied 12 VDC, 1 A supply for the control electronics, and a separate customer-supplied 12–50 VDC supply sized for the total LED load and conversion losses.

FEATURES INCLUDE:

  • Eight independent nominal 1,400 mA constant-current PWM outputs
  • Factory programmed to 900 Hz
  • Direct control of compatible high-power LED modules and LED engines
  • LED indicators for power, data/status and eight outputs
Weight 10 oz
Dimensions 3.8 × 6.4 × 1 in
PCB Selectable Features

Location

DPM8-DRV PCB User Guide

Similar documentation:

DPM8 Controller User Guide

12VDC CONTROL INPUT: DO NOT APPLY ANY VOLTAGE ABOVE 12VDC. CONNECT THE LED-DRIVER SUPPLY ONLY TO THE SEPARATE LED DRIVER VOLTAGE INPUT.

DMX CONTROL WARNING: NEVER use DMX data devices where human safety must be maintained. NEVER use DMX data devices for pyrotechnics or similar controls.

MANUFACTURER: ELM Video Technology

NAME: DMX to PWM Driver PCB

DESCRIPTION: The DPM8-DRV converts DMX to variable-duty-cycle PWM for eight installed constant-current LED drivers.

MODEL/MPN: DPM8-DRV

PCB FUSE: 1 A SMT—12 V control electronics and microcontroller only.

POWER INPUT 1: 12 VDC MAX control input; supplied 12 VDC, 1 A power supply.

POWER INPUT 2: Separate customer-supplied 12–50 VDC LED-driver supply. Size for total LED load power and conversion losses.

OUTPUT CURRENT: Eight constant-current outputs, nominal 1,400 mA per output during each PWM ON pulse.

LED STRING VOLTAGE: 6–46 VDC, also limited to the driver-supply voltage minus 4 V. A 48 V supply supports a string up to 44 V.

PWM FREQUENCY: Factory programmed to 900 Hz. Installed NLDD-1400H drivers: 1,000 Hz maximum. Keep DIP switch 10 OFF.

DATA TYPE: DMX512, 250 kbit/s.

DATA INPUT: Pin 1 not connected, Pin 2 Data −, Pin 3 Data +.

DATA LOOP OUT: Pin 2 Data −, Pin 3 Data +.

RDM CAPABLE: No

DIMENSIONS: 6.4 in W × 3.8 in L × 1 in H

WEIGHT: 8 oz

OPERATING TEMP: 32°F to 100°F

HUMIDITY: Non-condensing

POWER SUPPLY 1: Supplied 12 VDC, 1 A control supply.

CUSTOMER-SUPPLIED POWER SUPPLY 2: 12–50 VDC LED-driver supply sized for the total LED load and conversion losses.

You may also like…

Shopping Cart