RS232 to 0-10 Volt Analog Converter

Control 10 volt controllable equipment from a touch panel controller, computer, terminal, etc. The output voltage is directly proportional to the percentage sent to the unit for example, a sent value of 97% would be 9.7 volts out, 50% = 5 volts, 2.1% = 2.1 volts etc. Connect an RS232 terminal or computer port and control up to 12 outputs at 20mA (source) and 10mA (sink). The RS23210V, an RS232 to 0~10V converter/controller, is easy to install and use. Control any analog device such as LED drivers, dimmer packs, with variable 0~10 volt analog outputs. Or with the switch mode control Solid State Relays (SSR’s) to control equipment that requires on/off.