RS23210V Users Guide and Technical Specs 

Software Revisions:

V4.01 Release Aug 2019: Applies to and for DMX input unit - fixes buffer read delay

V4.00 Release 2018: DMX input option added with DMX loop THROUGH/HOLD/NORMAL features

Previous Software Revisions:

V3.00 Release Nov 2016: PCB design change

 May 2016: Version 2.10 pdf - Scene save and recall features added RS23210V Users Guide and Technical Specs V2.10 

March 2016: Version 2 pdf  -  V2.00 - added 512 channel support (previous 256), added CTS (Clear to Send) support, increased processor speed  RS23210V Users Guide and Technical Specs V2.00 

Brand: ELM Video Technology

Manufacturer: ELM Video Technology

Model: RS23210V-DIN

Name: RS232 to 0-10 Volt Converter Controller Driver

MPN: RS23210V-DIN

Dimensions: 3.9"W x 2.7"H x 4.425"D

UL Listings: Power Supply, PCB pre populated

RS232-PCB:

    RS232 Input: 9600 Baud rate, 8, 1, None 

    Command String Length: 96 characters

    Command String Execute Timing: 100mS recommended

    RS232 Connections: G-gnd, RX-(TX data from source to the DS232 unit), CTS (Clear to Send from DS232 to source)

    Data Output: DMX512 output 250 kHz, 5 and/or 3 pin female XLR [Pin 1 - Power supply common, Pin 2 Data -, Pin 3 Data +]

    RDM: No

    Internal FUSE: RS232 Converter PCB - 500mA PCB mount through hole

0-10V PCB:

    Internal Fuse: SMT 750mA

    Power Input: +12VDC apx 400mA (values apx, some circuits may vary)

    4 Channel:   no load:64mA   full load 145mA

    8 Channel:   no load 70mA   full load 230mA

    12 Channel: no load 76mA   full load 316mA

    16 Channel: no load 82mA   full load 402mA 

Voltage Output: 0~10VDC, (500 ohm minimum load)

Source Output Current: 20mA Max each

Sink Output Current: 10mA Max each

Data Type: DMX (250Khz)

Data Input: 5 (or 3) pin female XLR, [Pin 1 Not connected, Pin 2Data -, Pin 3 Data +]

Dimensions: 3.7 x 6.7 x 2.1 inches

Weight: 1.5 pounds 

Operating temperature: 32°F to 100°F

Storage temperature: 0°F to 120°F

Refresh Rate Per Second: 4 Ch's = 1162, 8 Ch's = 571, 12 Ch's = 384, 16 Ch's = 285 (amount of times per second the outputs are updated)

External Power Supply:

    +12VDC

    Voltage Input: 100 ~ 132 (or 240) VAC

    Current Output (Min): 1 Amps

    Power (Min): 12 Watts

• DMX input - provides DMX loop through for viewing and storing from any DMX source
• Equipped with 4 channels, upgrade to 8 or 12 channels
  
• DIN Clips for 35mm Rail - Clips are mounted on the PCB and will snap onto a 35mm rail
• DIN Rail 35mm x 8"