Power Input: +5 volts DC Regulated
Power Consumption: 400mA at full power (LCD back light full brightness)
Input power connector: 2.1 mm I.D. X 5.5 mm O.D. Center positive
Fuse: 700mA 5 X 20 mm
Dimensions: 3.385” Width X 3.485” Height X 1.9” Depth
Data Type: MIDI 31.5 Khz
Midi input: input 1 (rear), input 2 (front) 5 pin female DIN
Midi output: output 1 (rear) 5 pin female DIN, 20 ma output max
Memory buffer size: 112 bytes (37 - 3 byte messages or 112 - 1 byte messages)
Memory Storage Cycles: 10,000 times

5VDC Power Supply - Needed if used as an independent module

The MA1 module is a hardware based midi message analyzer, or analyser, and will decode midi messages and display them in a user friendly format. The MA1 also has a power switch, local reset and bus reset switch, and front access LCD brightness and contrast adjustments. The MA1 module has three inputs; BACK / FRONT / BUS. The 'back' input would be from the MIO module, the 'front' is the DIN plug on the front and the 'bus' is the chassis cable that would come from another module within the chassis. See the MIDI ANALYZER PAGE for a full description and more information.