Previous Revisions:

DMX CONTROL WARNING: NEVER use DMX data devices where human safety must be maintained.

NEVER use DMX data devices for pyrotechnics or similar controls.


  • Manufacturer: ELM Video Technology
  • Name: DMX 0 to 12/20/24 Volt Analog Converter Controller
  • Description: The DX10V-12/20/24 converts a DMX-512 signal input to a variable 0 to either 12, 20, or 24 volt analog output.
  • MPN
  •     12V: DX10V-12VDC3P
  •     20V: DX10V-20VDC3P
  •     24V: DX10V-24VDC3P
  • Model: DX10V
  • UL Listings: Power supply, PCB pre populated
  • CHASSIS: Anodized Aluminum .093" thick RoHS compliant
  • Internal Fuse: SMT 750mA
  • Power Input: +12VDC apx 400mA (values apx, some circuits may vary)
  • Voltage Output: 0~12/20/24VDC,
  • Source Output Current Per Output Max:
  •     12V model up to 15mA
  •      20V model up to 4mA
  •      24V model up to 4mA 
  • Sink Output Current Per Output Max:  
  •     12V model up to 7.5mA
  •     20V model up to 2mA
  •      24V model up to 2mA
  • DATA TYPE: DMX (250Khz)
  • Data Input: 5 (or 3) pin female XLR, [Pin 1 Not connected, Pin 2Data -, Pin 3 Data +]
  • Data Loop Output: (If equipped) 5 (or 3) pin female XLR, [Pin 1 Looped from pin 1 of input XLR, Pin 2Data -, Pin 3 Data +]
  • RDM: YES E1.20 Compliant [Software V8.20+]
  • Dimensions: 3.7 x 6.7 x 2.1 inches
  • Weight: 1.5 pounds 
  • Operating temperature: 32°F to 100°F
  • Storage temperature: 0°F to 120°F
  • Humidity: Noncondensing
  • Refresh Rate Per Second: Version 8.2x+ 8 Ch's = 1502, 16 Ch's = 739, 24 Ch's = 506 (amount of times per second the outputs are updated)
  • Output Connections: Phoenix style terminal block
  • External Power Supply (wall mount):
  •     12V Model: 13.5V 
  •     20V Model: 24V
  •     24V Model: 28V
  •     Voltage Input: 100 ~ 132 (or 240) VAC
  •     Current Output: 1 Amp
  •     Power: 12 Watts
  •     Polarization: Positive Center
  •     Output Connector: Locking Barrel Plug, 2.1mm I.D. x 5.5mm O.D. x 9.5mm
  • Select either 12V, 20V or 24V output model (see specifications tab for voltage and current information 
  • Equipped with 3 pin XLR connectors, optional 5 pin XLR's option available
  • Equipped with a single DMX input, optionally add a loop thru with 3 or 5 XLR connectors (terminate if unused)
  • Equipped with 8, 16, or 24 outputs
  • Mounting flanges - allows the unit to be counter top, under counter, or wall mounted


RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.

The DX10V-12/20/24 /converts/decodes a DMX signal to an analog voltage. Select the output option of either 0-12, 0-20, or 0-24 volt variable analog output. Other values can be special ordered from 12-24 volts. Control any equipment that requires a variable voltage of these ranges to control LED drivers, dimmers, motors etc. Insure the equipment controlled is within the output specs of the DX10V-12/20/24. The 12V model can source up to 15mA and sink up to 7.5mA. The 20/24V model can source up to 4mA and sink up to 2mA. Each output is assigned to a consecutive DMX channel and will vary from 0 to 12/24/24 volts in respect to the corresponding DMX channel level. Standard unit has 8 channels, available with 16 or 24 outputs. Includes 12VDC power supply. See the DX10V 0-10 volt full description category page for more information.


DMX 0-12/20/24 Volt Analog Converter

  • $399.00


  • 5 or more $379.00
  • 10 or more $359.00

Available Options


Related Products

DMX 0-10 Volt Analog Converter

DMX 0-10 Volt Analog Converter

**NEW** Now RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller. The DX10V..

$349.00

DMX 0-10 Volt Analog Converter PCB

DMX 0-10 Volt Analog Converter PCB

** Now RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.The DX10V-PCB c..

$159.00

DMX 0-10 Volt Analog Converter 19" 1RU Rack Mount

DMX 0-10 Volt Analog Converter 19" 1RU Rack Mount

** Now RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.The DX10Vr is a..

$649.00

DMX 2A Relay PCB with 0-10 Volt

DMX 2A Relay PCB with 0-10 Volt

The DX10V-RL is a DMX to 8 relay control PCB with simultaneous 0-10 volt converter. Use as an 8 rela..

$319.00

DMX (4) Ch 0-10 Volt Analog Converter PCB Lot of 5

DMX (4) Ch 0-10 Volt Analog Converter PCB Lot of 5

Now RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.Lot of 5 custom 4 ..

$629.00

DMX 16A Power Relay PCB with 0-10 Volt

DMX 16A Power Relay PCB with 0-10 Volt

The DX10V-PRL is a DMX to power (8) Relay control with simultaneous 0-10 volt converter. Use as a 8x..

$399.00

DMX Relay Driver w/ 0-10V Option

DMX Relay Driver w/ 0-10V Option

The  DXRL is a DMX 512 4 (or 8) channel relay controller with optional 0-10 volt variable analo..

$379.00

DMX Relay Driver PCB w/ 0-10V Option

DMX Relay Driver PCB w/ 0-10V Option

DXRL is a DMX 512 8 channel relay controller with optional 0-10 volt variable analog outputs. Assign..

$159.00

DMX 0-10 Volt Analog Converter PCB with Switch to Ground

DMX 0-10 Volt Analog Converter PCB with Switch to Ground

The DX10V-SG-PCB converts a DMX input to a variable 0 to 10 volt analog output and if the DMX level ..

$259.00

DMX 0-10 Volt Analog Converter Wall Mount

DMX 0-10 Volt Analog Converter Wall Mount

The DX10V-WM is a DMX to 0 10 volt converter in a wall mount aluminum enclosure and phoenix screw te..

$329.00

Tags: DMX, 512, 0-12 volt, 0-20, 0-24 converter, dimmer, controller, analog, dx10v, rdm