Name: DMX 0-12/20/24 Volt Analog Converter
Brand: ELM Video Technology, Inc.
Price: 399.00 USD

V8.23 July 2024: DX10V USER GUIDE V8.2x - RDM E1.20 Compliant (added factory default dip switch option)
V8.2x RDM Addendum
V8.xx DMX512 CHANNEL ASSIGNMENT TABLE A [pdf] or use a DMX Calculator App
DX10V 0-10 VOLT CONVERTER w/ LED DRIVER EXAMPLE
DX10V CONNECTION DIAGRAM [pdf]

Previous Revisions:

V8.22 August 2023: DX10V USER GUIDE V8.22 - RDM E1.20 Compliant
V8.1x: DX10V USER GUIDE V8.1x pdf
V8.1x: DMX512 CHANNEL ASSIGNMENTs are conventional (channel 0 = no operation, ch 1 = dip 1 up, etc)
V8.1x: DX10V CONNECTION DIAGRAM [pdf]

V7.1x: DX10V USER GUIDE V7.1x pdf
V7.1x: DX10V CONNECTION DIAGRAM [pdf]
DMX512 CHANNEL ASSIGNMENT TABLE V1 through V7.xx [pdf]

DMX10V USER GUIDE Hardware Rev 6 [pdf]
DMX10V USER GUIDE Revision 2-5 [pdf]

DMX CONTROL WARNING: NEVER use DMX data devices where human safety must be maintained.

NEVER use DMX data devices for pyrotechnics or similar controls.

Manufacturer: ELM Video Technology
Name: DMX 0 to 12/20/24 Volt Analog Converter Controller
Description: The DX10V-12/20/24 converts a DMX-512 signal input to a variable 0 to either 12, 20, or 24 volt analog output.
MPN
12V: DX10V-12VDC3P
20V: DX10V-20VDC3P
24V: DX10V-24VDC3P
Model: DX10V
UL Listings: Power supply, PCB pre populated

CHASSIS: Anodized Aluminum .093" thick RoHS compliant
Internal Fuse: SMT 750mA
Power Input: +12VDC apx 400mA (values apx, some circuits may vary)
Voltage Output: 0~12/20/24VDC,
Source Output Current Per Output Max:
12V model up to 15mA
20V model up to 4mA
24V model up to 4mA
Sink Output Current Per Output Max:
12V model up to 7.5mA
20V model up to 2mA
24V model up to 2mA
DATA TYPE: DMX (250Khz)
Data Input: 5 (or 3) pin female XLR, [Pin 1 Not connected, Pin 2Data -, Pin 3 Data +]
Data Loop Output: (If equipped) 5 (or 3) pin female XLR, [Pin 1 Looped from pin 1 of input XLR, Pin 2Data -, Pin 3 Data +]
RDM: YES E1.20 Compliant [Software V8.20+]
Dimensions: 3.7 x 6.7 x 2.1 inches
Weight: 1.5 pounds
Operating temperature: 32°F to 100°F
Storage temperature: 0°F to 120°F
Humidity: Noncondensing
Refresh Rate Per Second: Version 8.2x+ 8 Ch's = 1502, 16 Ch's = 739, 24 Ch's = 506 (amount of times per second the outputs are updated)
Output Connections: Phoenix style terminal block
External Power Supply (wall mount):
12V Model: 13.5V
20V Model: 24V
24V Model: 28V
Voltage Input: 100 ~ 132 (or 240) VAC
Current Output: 1 Amp
Power: 12 Watts
Polarization: Positive Center
Output Connector: Locking Barrel Plug, 2.1mm I.D. x 5.5mm O.D. x 9.5mm

Select either 12V, 20V or 24V output model (see specifications tab for voltage and current information
Equipped with 3 pin XLR connectors, optional 5 pin XLR's option available
Equipped with a single DMX input, optionally add a loop thru with 3 or 5 XLR connectors (terminate if unused)
Equipped with 8, 16, or 24 outputs
Mounting flanges - allows the unit to be counter top, under counter, or wall mounted

RDM E1.20 Compliant. Remotely setup and modify changes with an RDM Controller.

The DX10V-12/20/24 /converts/decodes a DMX signal to an analog voltage. Select the output option of either 0-12, 0-20, or 0-24 volt variable analog output. Other values can be special ordered from 12-24 volts. Control any equipment that requires a variable voltage of these ranges to control LED drivers, dimmers, motors etc. Insure the equipment controlled is within the output specs of the DX10V-12/20/24. The 12V model can source up to 15mA and sink up to 7.5mA. The 20/24V model can source up to 4mA and sink up to 2mA. Each output is assigned to a consecutive DMX channel and will vary from 0 to 12/24/24 volts in respect to the corresponding DMX channel level. Standard unit has 8 channels, available with 16 or 24 outputs. Includes 12VDC power supply. See the DX10V 0-10 volt full description category page for more information.