Previous Versions

V1.04 - Nov 2020
V1.03 - Released Feb 2020 (In Manual mode - no longer stores preset DMX Level, repower, DMX Loss, or DMX Ch Edit resets levels to zero, level change affects all 512 channels excluding offset value. Changed a few timer settings. )

DCRD Users Guide - V1.02 - Released March 2018

DCRD Users Guide V1.01

DMX CONTROL WARNING: NEVER use DMX data devices where human safety must be maintained.
NEVER use DMX data devices for pyrotechnics or similar controls.
Manufacturer: ELM Video Technology
MPN: DCRD-PCB
UL Listings: PCB pre populated
DMX Data: 250 kHz
Voltage Input: Regulated +12VDC or +5VDC – Factory Set
Current Input: 120mA (apx)
Data Input: DMX512, [Pin 2 Data -, Pin 3 Data +]
Data Output: DMX512, [Pin 1 - Power supply common, Pin 2 Data -, Pin 3 Data +]
RDM: No
Dimensions: 2" W x 1.5" L x .95" H (top of tact switches)
PCB Fuse: SMT - 500mA
Standoff Height: .25" (7 Segment display mounts flush to surface)
Button Height above standoff: .3"

DCRD Voltage Input Selection: Select the input voltage needed for installation, this is a factory set option
+5VDC or +12VDC power supply

Switch Types

Up/Down Switch Screw Terminals, No On Board Switches: Instead of UP/DOWN switches installed on the PCB, a 3 pin screw terminal will be mounted on the bottom of the PCB (Ground, Up, Down connections) for access to customer supplied/installed switches. Recommended for industrial and outdoor fixtures or devices that require a more robust switch.
Small Tact Switches: small switches installed on the PCB with .25" height standoffs and spacing (see documentations tab for dimensions)
Large Switches: Larger and more robust switches installed on the PCB with .5" height standoffs and spacing (see documentations tab for dimensions)

The DCRD-PCB is a DMX input channel reassignment (re-addresser) module. Readdresses the DMX start channel of a fixture or device that either has a hard to set dip switch, or doesn't have a user settable DMX channel. Designed to mount inside a DMX device (custom cutouts needed for external access). Simply loop the DMX input data through the DCRD module, set the device to channel 1 (if available to do so), apply power, set the channel via the up/down switches and operate as normal. To add to cart select the Voltage Input Selection.

FEATURES:

Engineered with quality parts and a reliable design
Assign the DMX start address channel to any of the 512 channels to any DMX device
Optional 5V or 12VDC power option (factory set)
Screw terminals installed for easy connection
Optional off board screw terminal connections for external up/down switch installation (recommended for industrial or outdoor DMX equipment where a more robust switch is needed)
Set DMX Loss Directive to either set the DMX output levels (fixture brightness) or turn off the DMX
Dimmable display

PCB INCLUDES:

Pre assembled PCB (Printed Circuit Board) with (4) standoffs as shown in photos

DMX Channel Reassign Display Module

Brand: ELM Video Technology, Inc.
Product Code: DCRD
Availability: In Stock

$99.00
5 or more $94.00
10 or more $89.00
50 or more $84.00
100 or more $79.00

Available Options

DCRD Options

No On Board Switches, Up/Down Switch Screw Terminal Installed

Small Tact Switches Installed

Large Switches Installed (+$15.00)

DCRD Voltage Input Selection

+5VDC Input

+12VDC Input

PCB Selectable Features

5V 1A Power Supply (+$19.00)

12V 1A Power Supply (+$19.00)

Comments

Qty

PCB INCLUDES:

DMX Channel Reassign Display Module

$99.00

Available Options

Related Products

DMX 0-10 Volt Analog Converter PCB

DMX 2A Relay PCB with 0-10 Volt

DMX (4) Ch 0-10 Volt Analog Converter PCB Lot of 5

DMX 16A Power Relay PCB with 0-10 Volt

DMX to 8 PWM Controller Driver PCB

DMX 0-10 Volt Analog Converter PCB with Switch to Ground