Coming soon, similar Template: DS5F r1 Drill Template pdf

Coming soon, similar Diagram: DS5F DMX Full Isolated Input PCB Connection Diagram jpg

Coming soon, similar Example: DS5 Configuration Example jpg

Manufacturer: ELM Video Technology
Model: DS5ISO-PCB
Name: DMX 1x5 Full Isolated Splitter
MPN: DS5ISO-PCB
+5VDC CURRENT: 150mA no load, 450mA at full load (5 outputs sourcing 32 loads each)
5V Fuse: 1A
DATA TYPE: DMX512 (250Khz)
DATA INPUT: DMX512 - Pin 1 - (Shield) Not connected, Pin 2 Data - , Pin 3 Data +,
DATA OUTPUT: 5 Independent DMX512 outputs - Pin 1 - Power supply common, Pin 2 Data -, Pin 3 Data +
DIMENSIONS: Without screw terminals and LED's extended: 1.3" L x 3.4" W x .788" H (including .375" standoffs)
DIMENSIONS: With screw terminals and LED's extended: 1.3" L x 3.4" W x .95" H (including .375" standoffs)
Weight: 2 oz

Dual 5V Power Supplies for ground and shield isolation
Chipset upgrade - The chipset upgrade has TVS IC's installed on the outputs offering TVS (Transient Voltage Suppression) isolation on each output of the splitter.
LEDs installation:
with the LED's top mounted-extended for enclosure mounting (with respective holes drilled and by moving the standoffs to the top of the PCB, the LED's are visible outside an enclosure)
OR uninstalled for custom LED connections (soldering required)
DMX Input & Output Screw Terminals
DMX Input & Output Wire Leads/Tails
DIN Clips for 35mm Rail - Clips are mounted on the PCB and will snap onto a 35mm rail
DIN Rail 35mm x 8"

The DS5ISO-PCB is a 1 In 5 out splitter PCB with an isolated input IC with optional bridgeable power supplies. Accepts a DMX 512 input from any DMX generating device such as a DMX lighting board or PC based DMX device and creates 5 additional outputs (i.e. split, distribute, buffer, amplify, boost) that will each drive up to 32 devices. The DS5ISO features isolation of the DMX input, with either a single power supply or a two power supply inputs for separate power input shield/ground connection. The DS5F offers full isolation without the loading of optical isolation. Several options available.

Gang additional DS5ISO PCBs to create as many outputs as needed. Add DMX outputs to existing installations or DIY projects. To "Add to Cart" select the LED mounting style required.

Optional Chipset Upgrade - TVS (Transient Voltage Suppression) protection on each output.

Note - The outputs are separately driven and electronically isolated, not "Transient Voltage Suppressed" isolated from each other unless the CHIPSET UPGRADE is selected.