DMX 512 PWM Dim Switch Gen PCB | ELM Video Technology

DMX 512 4 Ch Switch or PWM LED Driver

DPM4-RD Product Overview

view as flash

enlarge

DPM-RD
side view
mated to
DPM4
(sold separate)

rackmount
option

DPM-RD-PCB The DPM-RD is a DMX 512 PWM Driver PCB. Mates with the DPM4-PCB and will source 4 PWM outputs at +15VDC and 500mA each. Usage examples: control LED's brightness, rapid switching, or PWM driving. Designed to be daisy chained without having to have a separate control board if the same DMX512 channels need more sourcing capabilities. The DPM-RD (if equipped) has a +5VDC regulator on board to supply power to the DPM4-PCB, converting the required +15VDC power supply to +5VDC, thus powering both boards with only one power supply. Also, one +15VDC power supply, properly rated, can supply power to several DPM4-PCB's, optionally using the 'loop' power connectors.

DPM4-RD PCB CONNECTIONS pdf
DPM4-RD DRILL TEMPLATE AND WIRING DIAGRAM pdf
DPM-RD PCB ASSEMBLY OPTIONS AND EXAMPLES pdf
DPM4 INSTALLATION ADDENDUM pdf
DPM4-RD LABEL pdf

The DPM-RD PCB will power 16 4 Channel High Brightness DLE-PCB's LED Strips. Each DPM-RD has Mosfet Voltage driven inputs which means many DPM-RD PCB's can be daisy chained and controlled from one DPM4-PCB.

FEATURES INCLUDE:

Engineered with quality parts and a reliable and simple design
Compatible with all ELM Video Technology's DMX512 PCB's
Mates with the DPM4 Control board
On Board Regulator allowing one power supply to supply power for the DPM4 control board and the output destination
Wide voltage range input 5~15 VDC
Daisy chainable, one DPM4 control board can drive multiple DPM-RD boards.

Dimensions: 1.3" Length x 3.4" Width x 1" Height (including standoffs)

PCB Installation Info