DMX 512 Preset Tester Analzyer PCB

DMX Scene Save, Recall, Preset Send Receive PCB

DMX Preset 10 | Analyzer | Tester PCB | DTR2

enlarge

Side View

DMX LCD Data Transceiver Analyer Preset Module DTR-PCB Back

Back View

LCD Screen Views

Optional
Quick Connect (QC) Terminals

DTR PCB $229 Sale $198

The DTR-PCB is a DMX 512 data send / receive unit with 10 store and recall preset scene snapshots. Each of the 10 presets will store 512 channel levels including the packet size and start code. Each preset can be edited to precise values and recalled anytime. Modes include: TEST:TRANSMIT - "GROUP Mode" sends any level to any channel to create a specific snapshot of any scene. Then save, edit, or load a preset. "ALL Mode" sends a specific level to all of the channels at once. "SINGLE Mode" sends a specific level on a single channel and advance it to any channel. TEST:RECEIVE - Analyze incoming DMX data on any of the 512 channels.

The OPERATE Mode will send a preselected snapshot or loop through the incoming data. Add an optional offset value to change the start channel to any start channel needed. In the operate mode, the status is recalled upon powering. Plus many more features!

The DMX Preset has many different uses for example: To Receive: connect the input to any DMX 512 source and analyze and/or save the data (i.e. 512 channel levels, packet size, start code, and frequency) to 1 of 10 presets. Any snapshot or preset can be edited and resaved at any time. To Send (or Transmit): connect the output to any DMX 512 daisy chain as the (only) DMX generating device and send any channel any level, packet size, and start code. Create the scene from scratch or recall it from 1 of 10 stored presets. Receive and Send: connect a DMX source to the input and a daisy chain to the output. Analyze, Send, or in the Operate Mode the input can be "looped through" to the output, or a preset can be loaded to send. Create an offset value for the start of the packet, for example, start sending channel 1 out on channel 25 (ch 2=26, ch 3=27 etc.)

PCB Connections DMX Preset 10 | Analyzer | Tester | DTR PCB Connection Diagram image

FEATURES INCLUDE:

10 Recordable and Recall Preset Scene Snapshots
Customizable PCB
Decimal, Hexadecimal, and Percentage Display Options
Statistics Display (packet size, start code, and rate or (frequency))
Editable Packet Size and Start Code
Programmable Channel Offset
Easy Editing of Stored Scene Snapshots
20x4 Line LCD (Liquid Crystal Display)
Programmable Backlight and Contrast Adjustments
5V or 7~15VDC Input Range

Main PCB Dimensions: 3.35" W x 2.75" (4.9" with (4) Btn PCB attached) H x 1.62"
(4) Button PCB Dimensions: 1.65" W x 1.14" H x .94"

DTR USER GUIDE[PDF]
DTR Configuration Example & Block Diagram[JPG]
PCB CONNECTION DIAGRAM[PDF]
DRILL TEMPLATE AND WIRING DIAGRAM[PDF]
SOFTWARE FLOW CHART[PDF]

DTR PCB INCLUDES:

Preassembled DTR-PCB (Printed Circuit Board) with .5" standoffs and screws
Drill Template and Wiring Diagram
Enclosure Labels: Black on Clear or Black on White (Replacement Labels [PDF])
(1) 120 ohm Terminating Resistor
Clear Bezel (large window enclosure LCD cover)

PCB Installation Info

Contact sales for any custom design, technical, delivery schedule, and predesigned chassis information.