ELM Video Technology, Inc.
DMX
PWM / Dimmer / Switch Generator Module
enlarge
Angled View
Back View
Module DPS2: This module is a
DMX 512 PWM (Pulse Width Modulation), LED dimmer, and
switch, generator. The DPS2 module generates 4 PWM or
switch outputs that could drive LEDs such as 16
4 Circuit LED strips
(high brightness), mechanical or solid state
relays (SSRs), effects lights, or any triggered devices such
as florescent lights and water fountain control solenoids.
The DPM4-RD PCB
is used to generate and drive the 4 outputs each can sink or source up to 500mA
at +5 or +7~15 Volts (voltage depends on the devices to
be driven), and addressable to any 4 consecutive of the 512 channels.
The start channel is assigned by dip switches
1~9,
DMX512 CHANNEL ASSIGNMENT TABLE
[PDF]. The outputs can be accessed
with the DM6 module
which will provide up to 24 output connections. Dip switch
setting changes the output mode: PWM or Switch, in
the switch mode the outputs are either on or off depending
on the DMX level with a threshold of 127~128 (125~0
turns
off, 131 ~ 255 turns on).
This module is part of the DMX
Modular System and requires a
modular
chassis or enclosure, and a
PS-IO2,
PS-IO2x power
module or a 5V / 7~15V power supply. An input/output
DM6 module or
equivalent, and a DMX source from any chassis connector
(e.g.
PS-IO2x
or DX6).
Module Dimensions: 3.5"W x 3.4"H x apx 1.5"ID
The DPS2 module will hold 4 PCBs and can be manufactured with several configurations and options, contact sales for any custom needs. Below you can choose additional output drive options. With just the control PCB (DPM4-PCB) installed the output drive for each of the 4 channels are 5V at 50mA, with the optional drive PCB (DPM4-RD-PCB), the output for each of the 4 channels is +5V or +7~15 Volts at 500mA. Two additional drive PCBs can be added (assigned to the same 4 DMX channels) each adding 500mA per channel.
FEATURES INCLUDE:
- Customizable Modular Design - easily mounts in the 2RU rack mount chassis
- Modes: PWM or Switch
- Field Serviceable: Standard 5 x 20mm Fuse and Socketed chips (IC's) for easy replacement
- Engineered with quality parts and a reliable and simple design
- Compact Rugged Aluminum Faceplate
- Power, Data, and (4) Output LEDs
Contactsales for any custom design, technical, delivery schedule, and predesigned chassis information.
Multipurpose I-O Module
DMX PWM / Dimmer / LED Driver
16 Ch DMX to 0~10 Volt Converter / SS Relay Driver Module
DMX LED Strip
Made in the USA
