ELM Video Technology, Inc.

Modes include:  TEST:TRANSMIT -  "GROUP Mode" sends any level to any channel to create a specific snapshot of any scene. Then save, edit, or load a preset. "ALL Mode" sends a specific level to all of the channels at once.  "SINGLE Mode" sends a specific level on a single channel and advance it to any channel. TEST:RECEIVE - Analyze incoming DMX data on any of the 512 channels.

The OPERATE Mode will send a preselected snapshot or loop through the incoming data. Add an optional offset value to change the start channel to any start channel needed. In the operate mode, the status is recalled upon powering. Plus many more features!

The DMX Preset has many different uses for example: To Receive: connect the input to any DMX 512 source and analyze and/or save the data (i.e. 512 channel levels, packet size, start code, and frequency) to 1 of 10 presets. Any snapshot or preset can be edited and resaved at any time. To Send (or Transmit): connect the output to any DMX 512 daisy chain as the (only) DMX generating device and send any channel any level, packet size, and start code. Create the scene from scratch or recall it from 1 of 10 stored presets.  Receive and Send: connect a DMX source to the input and a daisy chain to the output. Analyze, Send, or in the Operate Mode the input can be "looped through" to the output, or a preset can be loaded to send. Create an offset value for the start of the packet, for example, start sending channel 1 out on channel 25 (ch 2=26, ch 3=27 etc.)

This module is part of the DMX Modular System and requires a modular chassis or enclosure, and a PS-IO2, PS-IO2x power module or a 5V power supply.

For access to the 2 inputs and 2 outputs (e.g. DX6 or PS-IO2x module) with 3 or 5 pin XLR connectors or equivalent is needed.

Module Dimensions: 6.75" x 3.5" x apx1.75" 

DTR USER GUIDE[PDF]
DTR Configuration Example & Block Diagram[JPG]
SOFTWARE FLOW CHART[PDF]